Honeywell Lane Oldham OL8 2JP

Opening Hours : 8:30AM–4:30PM

Stay connected:

Among our valued customers are the owners and operators of a wide range of craft including:

  • Narrow Boats
  • Fleet Operators
  • Fishing Vessels
  • Passenger Boats
  • Speedboats
  • Runabouts
  • Cruisers
  • Ski Boats
  • Classic Boats
  • Race Boats
  • Steam Boats
  • Ferries
  • Dredgers
  • Motor Sailors
  • Life Boats
  • Amphibious Vehicles
  • Overseas Charter Operators

All components are available individually or as full assemblies.

Wide range of shafts and bearings off the shelf or manufactured to suit your requirements.

Full range of rudders, 'P' Brackets and Palm Brackets, both glass in or bolt on type. Available in bronze, mild steel, and stainless steel to suit your boat.

Repair :

At Crowther Marine we also realise that sometimes damaged propellers and sterngear need immediate attention, that’s why we provide a comprehensive emergency repair service for all our products and for other manufacturers products alike, including bronze, aluminium and stainless steel propellers.

Products:

PROPELLERS:

All our propellers are cast from the best quality Manganese Bronze or if required Nickel Aluminium Bronze to British Standard. We carry a comprehensive range of patterns of diameters up to 42” with various pitch dimensions. In all we have a range in excess of 450 patterns.

Propellers are normally supplied disc ground but can be polished if necessary. All propellers are statically balanced, keyward and taper bored to customers’ requirements. With the comprehensive range of patterns that we carry, it is normally possible for us to supply the exact propeller to your requirements.

Sterngear (Type SB):

The type SB Sterngear is one of the most popular systems we manufacture. Each set would comprise of:

Inboard Gland/ Stuffing Box, Bronze Tube, Bearing and out board Gland.

Various types of forward and aft glands are available, these can be incorporated to suit customers individual requirements. A choice of bearings is given dependant on customers’ requirements and application. A full range of sizes are available to suit shaft size up to 3”.

Sterngear (Type D.J. Mark 4):

This Sterngear was designed mainly for the steel narrow boats used by the hire fleet operators of the inland waterways.

Each set is made up with an aft steel type WELD IN gland, steel stern tube fitted with oilite bearings at each end and with lubrication nipple fitted, forward flange and stuffing box cast from Manganese Bronze or Gun Metal and fully machined.

Type D.J. Mark 4 is available in 1.25” and 1.5” shaft sizes. Standard lengths of tube are 9”, 12”, 15” and 18”, enabling us to offer off the shelf delivery. Other lengths made to order.

One of the advantages of this type of Sterngear is that at the end of a season the tube can be removed complete with its bearings and a replacement fitted with the minimum down time and a great saving in cost against normal types of stern tubes and bearings.

Glands:

A full range of varying types of inboard and outboard glands are available. With the exception of type AB450 all glands are cast from Manganese Bronze or Gun Metal and fully machined. Type AB450 is a special type manufactured from Mild Steel to allow the unit to be welded into steel boats. Included in our range is a water scoop housing fitted with a cutlass type bearing. All types are available for shaft size up to 3″.